Skip to main content

Define color effects for the LED strip

9. Colors and Effects​

It would be a shame not to light up the LED lights in their full range, so don’t hesitate to try, for example, the command node/power-controller:0/led-strip/-/effect/set, to which you pass the message:

{"type":"rainbow", "wait":10}

Are your eyes hurting from too much brightness? node/power-controller:0/led-strip/-/brightness/set takes values from 0–100 as the message and sets the brightness.

10. Addressing​

The LED strip can also be addressed per individual LED using node//led-strip/-/set-pixel/set, the message then contains information like {"type":"rainbow", "wait":10}.

{"type":"rainbow", "wait":10}

Are your eyes hurting from too much brightness? node/power-controller:0/led-strip/-/brightness/set takes values from 0–100 as the message and sets the brightness.

11. Summary​

You have paired the Power Module with firmware for the LED strip.
You know how to light up the LED strip in different colors and even add effects.